Packaging and Accessories:

As with many devices; the Dojo comes in a full color package that is a sleeve over a sturdy box. The sleeve does a good job at conveying the purpose of the device, as well as listing the contents and requirements to use the Dojo. As you would expect, you need a broadband Internet connection and a Wi-Fi router. What I found more surprising is that this device only requires IOS 5/Android 4.3 or newer. While I am not an IOS user, I do know there have been quite a few security improvements in Android since 4.3. So they must feel pretty confident in their product to protect such legacy devices.



The box inside has the Dojo logo emblazoned on the split top design. Flipping these open reveals the Dojo network box and the pebble front and center. The pebble is enclosed in an easy open clamshell and the base unit has a cardboard pull tab strip below it for easy access. To the left is a small compartment that has the other accessories like power cable, Ethernet cable, and Quick Start guide.



The Basics:

The base unit itself is pretty simple; the front edge is very minimalistic with just the Dojo logo in the left corner. Turning to the back you’ll find a power connection, (2) Ethernet ports, and a reset switch. The bottom has (4) little rubber feet, the model number, as well as MAC and S/N info. The top is the only place where there is any shape other than rectangular. On the right side you will see a slight depression designed for the pebble to sit. If it weren’t for this molded section I would have thought this was a prototype device. The plastic used feels somewhat cheap and the large gaps between parts doesn’t really give you a finished look. But in all honestly this device is not likely to be seen, it will be tucked away in your network cabinet.



The pebble on the other hand looks a bit more refined with its rounded shape. The outside is a matte black plastic and you can partially see the illuminated rings hidden in the pebble. Flipping the pebble over you’ll find a sticker indicating model number, a switch, and arrows indicating sliding direction to access battery compartment. This unit takes (4) AA batteries which are NOT included. With the cover off you’ll also see two contacts which provide continuity for the switch mounted on the base.