| Tuniq Miniplant 950W Power Supply
|
Cables:
The Tuniq Miniplant 950W power supply comes with enough connections to keep most systems powered up without splitters. All of the cables are well finished in a black mesh, the power connectors are also black, and with all the other black features on the PSU this creates a nice monochrome effect.
The image below shows all of the cables coming from the power supply in one big bundle. The length of each cable is more than adequate for reaching the corners of even larger cases, and in the next few images we'll examine the different types of cables separately.
The below left image shows off the 20+4 pin connector and a variety of 12V connectors. The only issue with any of these is that the 20+4 pin connector provides no secure means of holding the extra 4-pins to the motherboard or to the 20-pin connector. Therefore the 4-pin portion could possibly come out of the plug on the motherboard without warning, and while in use! The below right image shows a 6-pin PCI Express cable and an 8-pin PCI Express cable fitted with a 8-pin to 6-pin adapter.
 
The below left image shows the legacy drive connections, where you can see there are two leads providing a total of six 4-pin connections and two floppy drive connections. The SATA power connections are shown in the below right image, and here you can see there are two leads providing a total of six connections.
 
|
|
|
|
