Procedure (continued):
For the next step, go ahead and drill some holes on the inner edges to apply the pin-stapler, unless you can solder them together.
After that, apply some silicon to the cap and staple it onto the box.
Apply silicon:
Staple cap onto rectangular box:
While waiting for the silicon to dry (need one day), we go back to bridge the tube and the fan via the plastic bag.
Using conventional tape, you can attach all three without breaking a sweat. Also, the tape will assure that no air will escape.
At this moment, 90% of this project is completed.
Now all you have to do is attach the tube to the adapter which connects to your 2 open bays. You can use tape if you wish too. It should look something like this.
*If you wish to even dampen the vibration created by the fan, you can use a soft mouse pad or suction cups. Either will work great.
|
|
