|
CPU
|
� LGA775 socket for Intel Pentium 4 / Pentium D processor
� FSB 1066/800 MHz
� Support Hyper-Threading Technology
|
|
Chipset
|
� NVIDIA C19XE & MCP51
� North Bridge: NVIDIA C19XE
� South Bridge: NVIDIA MCP51
|
|
Memory
|
� Dual-channel DDR2 memory architecture
� 4 x 240-pin DDR2 DIMM socket support up to 16GB
� Support DDR2 533/667 DDR SDRAM
|
|
Expansion Slot
|
� 2 x PCI Express x16 slot ( SLI mode: x8, x8 )
� 2 x PCI Express x1 slots
� 3 x PCI slots
|
|
Storage
|
� Supported by NVIDIA MCP51
-- 4 x Ultra DMA133/100/66 devices
-- 4 x Serial ATA devices
� RAID0, RAID1, RAID0+1, RAID5 configuration
|
|
IEEE 1394a (optional)
|
� VIA 6307 support 2 x IEEE1394a ports
|
|
Audio
|
� Realtek ALC883 8-channel audio CODEC
|
|
LAN
|
� Marvell 88E1115 Gigabit LAN controller
� Realtek RTL8100C 10/100 Mbps Fast Ethernet Controller (optional)
|
|
Rear Panel I/O
|
� 1 x PS/2 keyboard & PS/2 mouse connectors
� 4 x USB ports
� 1 x RJ45 LAN connector
� 1 x Serial port (COM1)
� 1 x Audio port (Line-in, Line-out, Mic-in)
� 2 x Digital SPDIF (Optical & Coaxial) out
� 1 x Parallel port (LPT1)
|
|
Internal I/O Connectors & Headers
|
� 1 x 24-pin ATX Power Supply connector
� 1 x 4-pin ATX 12V connector
� 1 x FDD connector supports two 360K~2.88MB FDDs
� 1 x Auxiliary 4-pin +12V connector
� 1 x IrDA for SIR header
� 1 x Speaker header
� 2 x IDE connectors
� 4 x Serial ATA connectors
� 2 x USB 2.0 headers support additional 4 USB Ports
� 1 x Front panel switch/LED header
� 1 x Front panel audio header
� CD in header
� CPUFAN/NBFAN/SYSFANx2 connectors
|
|
System BIOS
|
� AMI BIOS with 4Mb Flash ROM
� Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
� Supports ACPI revision 1.0 specification
|
|
Form Factor
|
� ATX Size 305mm*244mm
|
