Both times I installed the motherboard, the installation went very easily. There is plenty of room to work inside this case (with the exception of the power supply area). Once it is all installed, I found that there is plenty of room to install even the longest video card. Also, at the top left (near the 120mm fan) are two built-in cable restraints. These are not the best, but they are helpful in keeping your light weight cables tucked away.
Attaching an LCD monitor to the Chieftec BL-01B Bravo L-Type case was extremely simple. For this review a 22 inch widescreen monitor was used.
Once you have removed the stand from your VESA mount compatible LCD monitor, you attach Chieftec's VESA bracket to the LCD using four screws.
Once the VESA bracket is firmly attached to your LCD panel, you can slide it onto the case. The locking tab at the top of the case needs to be pulled up so the lock pin can be withdrawn. Once the panel is at the proper height, simple press the locking tab down to lock the panel into position. You can always adjust the height of the panel later by pulling up on the locking tab and adjusting the height.
