jedihobbit
Rated XXX
|
 Posted: Sun, 07 Feb 2010 12:04:04 Post Subject: |
 |
|
As it turns out there is a wee bit more left before this log can be called "complete". Several things were changed.......
1. The PSU fan ended up pointed toward the side
2. Added a Silverstone FX 121 Cross Flow Fan
3. Pulled out the constent speed 120mm bottom front fan for a thermally controlled Enermax Everest 120mm
So here are some pictures that so the little changes.....
Here you can see the two thermal leads as they cross the mobo, and them you have the thermal probe for the mosfets place in the cooler.
 
Because of reversing the PSU orientation and adding the cross flow fan that required the cable management to not be quite as clean as before.
   
This SG03 case was not modded at all which is unusual for me. It is just that for the most part I really liked it. If I were to do a mod it would be a blow hole for a 120mm located to rear of the top.
_________________
As of 02/01/11
DreamCatcher AM3 >> (Down Again) >> SG01 Evo, MSI 785GM-E65, PII X4 955(AQ H2O Cooled), XFX GTX285(EK H2O Cooled), Seagate 7200.10 ST380815AS 80GB, 2 x G.S. F3-12800CL7D-2GBPI, MODU82+ EMD525AWT, XP Home SP2
KestrelFlight >> (Under Construction) >> Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, 2 x WD 1 TB Blacks, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3 |
|
