jedihobbit
Rated XXX
|
 Posted: Sun, 26 Oct 2008 23:35:09 Post Subject: |
 |
|
In the wee hours of the morning...........
As it turns out GPU folding is out of the question and I will drop the idea........reason? There is only 7-1/2" /191mm + 1/8" between the drive/hdd rack and the rear I/O plate.
Case cooling with be the biggest challenge and has been addressed in the work log. If you could look at what I got and make any suggestions that would be greatly appreciated!
Thanks for all the input - just hope it doesn't turn into a wasted effort! 
But by midday...........
This project just came to a screeching halt due to a substantial amount of stupidity.
Set up all the stuff to test and run on the tech station and managed to apparently corrupt the bios chip. To confirm I "stole" the one out of DreamCatcher and promptly put it in back-a$$-ward – it is toast and hope I haven’t screwed the mobo.   
Got an e-mail into Abit to see what this'll cost me!
_________________
As of 02/01/11
DreamCatcher AM3 >> (Down Again) >> SG01 Evo, MSI 785GM-E65, PII X4 955(AQ H2O Cooled), XFX GTX285(EK H2O Cooled), Seagate 7200.10 ST380815AS 80GB, 2 x G.S. F3-12800CL7D-2GBPI, MODU82+ EMD525AWT, XP Home SP2
KestrelFlight >> (Under Construction) >> Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, 2 x WD 1 TB Blacks, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3 |
|
