Doctor Feelgood
Administrator
|
 Posted: Thu, 10 Nov 2005 23:50:39 Post Subject: |
 |
|
Hopefully the PSU wasn't connected to the CPU fan during that test you did... that would be tricky. But, at least the PSU works!
Now, if you reconnect it to the motherboard, you can also test to see if it is the power button on your case. You will need to find the power switch header on the motherboard, and remove the wires that connect it to your case's button. Then, get a jumper and temporarily connect the two pins on your board. This should jump start your system, and you only need to complete the circuit for an instant and it should come on.
(I do this often, as my systems don't always have cases or power buttons).
Let me know if my explanation was too brief. |
|
