dadx2mj
Rated XXX
|
 Posted: Thu, 30 Jun 2005 20:26:24 Post Subject: Checksum Error Help! |
 |
|
OK I got a new case and moved my system into it today. System consists of
Asus A7N8X-E
Mobil 2400+
1 gig PC3200 2x512
ATI 9600 Pro
Maxtor 40 gig (yeah I know)
Anyway when I got it all put in the case it did not want to boot giving me a checksum error. So I pulled the CMOS battery and used the jumper to clear CMOS. It booted up and went into Windows. So I check and it is running at 533MHz so I reboot to go into bios and get the checksum error. Now the way it sits when I boot it up it shows the checksum error and says to push F1 to continue or DEL to enter set up. If I go into the bios I can set everything up but when I "Exit and Save" it restarts and just goes to a black screen. Fans and everything are running but that is it. Only way I can get any activity again is to pull the CMOS battery. If I go with the F1 it loads into Windows and all is good except I am running at 533MHz and if I have to restart I have to pull the damn CMOS battery. Thinking it might actually be a bad battery I replaced it but still the same thing. Any ideas or suggestions guys? |
|
