View previous topic :: View next topic |
Author |
Message |
Templar Rated PG-13
Joined: 16 Apr 2009 Posts: 28
|
Posted: Mon, 20 Apr 2009 17:17:26 Post Subject: Low Profile Cooler recommendation |
|
|
So, I am making some upgrades to my Lanbox Lite. Up until now it has basically served as a media center, but my wife is wanting to us it for some more intense purposes. The airflow into and out of the case is not horrible, but the AMD Athlon 64 x2 4800+ cpu runs a bit warm on the stock cpu cooler, and that is before overclocking. It looks like I have a max height of 88mm for an upgraded cooler. I would also like to keep the unit as quiet as possible. As it is right now, if there is any background noise we have to move extremely close just to see if we turned it on.
Right now what I have found are the Arctic Cooling Freezer 64 LP http://www.newegg.com/Product/Product.aspx?Item=N82E16835186019
The Scythe Shuriken
http://www.newegg.com/Product/Product.aspx?Item=N82E16835185063
Anyone have any experience with these or any other recommendations?
Thanks. |
|
Back to top |
|
|
Little Bruin
Boo Boo
Joined: 07 Apr 2003
Posts: 667
Location: Pic-A-Nic Basket |
|
|
burnin8r Rated R
Joined: 15 Apr 2009 Posts: 54
|
Posted: Mon, 20 Apr 2009 18:48:57 Post Subject: |
|
|
I am using the Coolermaster GeminII S in my Silverstone SG02 case. I replaced the stock fan with a 120mm x 20mm Yate Loon to fit under the power supply... you have slightly more headroom in the LanboxLite so the stock fan should work fine. It costs a few dollars more than the other ones you were looking at but performance wise it is one of the best low profile heat sinks: http://www.frostytech.com/top5_lowprofile_heatsinks.cfm _________________ ■ Silverstone SG02-F ■ AMD X2 7750 @ 3.2GHz ■ Biostar TA790GX XE µATX ■ Coolermaster GeminII S ■ 2x 2GB G.Skill DDR2 1066 ■ Galaxy 8800GT 512MB ■ Corsair HX520 ■ 2x 250GB Western Digital SE16 ■ |
|
Back to top |
|
|
uNeec Rated PG
Joined: 19 Apr 2009 Posts: 20
|
|
Back to top |
|
|
burnin8r Rated R
Joined: 15 Apr 2009 Posts: 54
|
Posted: Mon, 20 Apr 2009 23:17:05 Post Subject: |
|
|
uNeec wrote: | Noctua NH-C12P, they're beastly. |
they re also 113mm tall... the OP is asking for something 88mm or less.
I do recall a guy grinding down his NH-C12P with a belt sander to fit in an SG01:
Free Image Hosting by ImageBam.com
but not everyone buys a $60+ heat sink with the intent to totally alter it's design =) _________________ ■ Silverstone SG02-F ■ AMD X2 7750 @ 3.2GHz ■ Biostar TA790GX XE µATX ■ Coolermaster GeminII S ■ 2x 2GB G.Skill DDR2 1066 ■ Galaxy 8800GT 512MB ■ Corsair HX520 ■ 2x 250GB Western Digital SE16 ■ |
|
Back to top |
|
|
Templar Rated PG-13
Joined: 16 Apr 2009 Posts: 28
|
|
Back to top |
|
|
daemon Rated R
Joined: 24 Jul 2007 Posts: 90
|
|
Back to top |
|
|
nolonger Rated R
Joined: 19 Apr 2009 Posts: 98
|
Posted: Tue, 21 Apr 2009 19:13:43 Post Subject: |
|
|
This Zalman VF2000 looks like an awesome cooler. Even though it says VGA cooler it really is hybrid so you can use it on your GPU or CPU. It's only 45mm tall, so it should fit in any case. |
|
Back to top |
|
|
Little Bruin
Boo Boo
Joined: 07 Apr 2003
Posts: 667
Location: Pic-A-Nic Basket |
|
|
Templar Rated PG-13
Joined: 16 Apr 2009 Posts: 28
|
Posted: Wed, 22 Apr 2009 13:42:39 Post Subject: |
|
|
Well, I ended up ordering a Cooler Master, but not the Gemini II.
http://www.coolermaster-usa.com/product.php?category_id=1623&product_id=2736
I re-measured my available space and I have 95mm from the CPU to the bottom of the power supply support bracket, and I wasn't certain how much airflow would get through the 7mm gap if I went with the Gemini II. The Vortex 752 is only 75.4mm high, so that 20mm gap should allow sufficient airflow. |
|
Back to top |
|
|
nolonger Rated R
Joined: 19 Apr 2009 Posts: 98
|
|
Back to top |
|
|
Crisis Rated NC-17
Joined: 09 Feb 2007 Posts: 182
|
|
Back to top |
|
|
|