jedihobbit
Rated XXX
|
 Posted: Sat, 27 Dec 2008 02:00:23 Post Subject: |
 |
|
 DUMB-DE-DUMB-DUMB!!!
Confucius say "It would be nice when the SATA cable comes loose it would fall all the way out....."
Apparently on the last occasion that I reached inside the case from the top to feel how hot the cpu was I must have brushed the SATA connector on the back of the Raptor X. Then when I rebooted the hdd couldn't be found. Happen to notice this when review my bios settings and noticed the hdd was listed………  
So been playing and now have found a new problem. The North Bridge is cooking!!!!! Using speed fan & I believe the AUX temp is the NB as in doing a 15min run with OCCT @ 225FSB everything was good except for the AUX. Which got as high as 65C, and when I touched the NB and sure enough it was HOT. For S & Gs I threw an 80mm fan in the case somewhat pointed at it and the power caps.
So boosted the FSB to 250 and tried another 15 min run, everything except the NB stayed in the upper 40s – low 50s and the NB in the upper 50s with one or two trips about 60C. This is without the fans running in the Aquaduct BTW. So guess that answers the question about “Is it waiting for a fixed temp to turn on?”. Hope Stefan from Aqua Computer gets back with me on this!!
_________________
As of 02/01/11
DreamCatcher AM3 >> (Down Again) >> SG01 Evo, MSI 785GM-E65, PII X4 955(AQ H2O Cooled), XFX GTX285(EK H2O Cooled), Seagate 7200.10 ST380815AS 80GB, 2 x G.S. F3-12800CL7D-2GBPI, MODU82+ EMD525AWT, XP Home SP2
KestrelFlight >> (Under Construction) >> Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, 2 x WD 1 TB Blacks, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3 |
|
