Doctor Feelgood
Administrator
|
 Posted: Wed, 03 Oct 2007 14:03:14 Post Subject: e6850 Overclock |
 |
|
Figured I'd start a fresh thread now... (no more speculation required)
Specifications for the initial setup:
ASUS P5KC (Intel P35) Motherboard
Intel e6850 (3.0 GHz, 1333MHz FSB, 4MB Cache) C0re2Duo CPU
Stock Intel CPU Cooler!
2GB OCZ System Elite 800MHz Dual Channel DDR2 Memory
Western Digital 750GB SATA-II Hard Drive
PCP@C 750W Silencer PSU
Cooler Master iTower 930 Case
The cooler and memory are NOT for performance, but I wanted to get up and running and are doing fine for initial use.
Just ran memory tests so far, as that is what I want to focus on since it is the weakest link.
Initial setup had the memory at 4-4-4-13 and 2.0V. No other voltages or timings changed. FSB at 1333MHz (4x333), multiplier at 9.
First big stop has the memory at 5-5-5-15 and 2.0V, CPU multiplier dropped to 8 and FSB now at 1500MHz (4x375)
Bottom line is the CPU is at the same speed (3.0 GHz), with no increase in voltage or heat... under 40C.
Everest Scores: Read / Write / Copy / Latency
9x333MHZ (800MHz Memory): 7475 / 6091 / 6177 / 65.6
8x375MHZ (900MHz Memory): 7977 / 6793 / 6596 / 63.4
Last edited by Doctor Feelgood on Mon, 19 Nov 2007 18:49:57; edited 2 times in total |
|
