Blue|Fusion
Rated XXX
|
 Posted: Fri, 15 Dec 2006 20:27:23 Post Subject: |
 |
|
The system and all components are plugged into a Belkin UPS. As a matter of fact, the power went out briefly while I was away today and I came home to a still running computer, so the UPS is running fine.
lm_sensors just got an updated driver for the Winbond chip used on the ASUS motherboard, but I believe there is a little fishyness with it as it displays the 12V rails with 6 volts. I really don't believe that's right, so I think there's an error in the math on that driver. But for the sake of things, here's the rest of the output from the voltage readings:
I'm going to try to get some readings from Windows in a bit. Also, FYI, the BIOS shows the 12V rails as at around 12V so I am pretty certain that's just bad math in the driver.
_________________
5 home-built PCs, ASUS A6Jc Laptop, and a PowerEdge 2650 - all running Gentoo. Now if only I can get a car and plane to run it. Take a look at my Gallery! |
|
