lionking06
Rated PG
|
 Posted: Thu, 22 Jun 2006 18:19:51 Post Subject: |
 |
|
Hi
Thank you very much for this info. I apprecieate.
I just bought this motherboadr, and all other new hardware.
I am not new to hardware, but seems like i have not done this for 6 years now.
Please can you guide me, and ans a few Q's and let me know of other things i should be aware, before i start assembling.
========================================
What I bought:-
Motherboard (1)
====================
- ECS C19-A SLI (1.0A)
VideoCard (1)
====================
PNY Geforce 7600GT 256 MB - SLI - with heatsink n fan
Memory
2GB (2x1GB)
====================
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Unbuffered Dual Channel Kit System Memory Model F2-4200PHU2-2GBNV - Retail
Processor
====================
Intel® Pentium® 4 processor 631 - 3.0 GHz, FSB 800MHz / 2MB L2 Cache (retail) - with heatsink n fan
HardDisk
====================
320GB Capacity, 3.5" Internal, 16 MB Buffer, 7200 rpm Spindle speed, 300 MBps Data transfer rate, SATA 3Gb/s Interface
====================
My Q's
===================
- What power supply is idle (450v 420v, 550v, etc) ? I dont intend to use 2 PICe cards, but I may buy in future.
- The powersupply type is ther any, like i read ATX v2.0 or anything else about this?
- Will i be able to plug in the wires for HDD led / internal speaker / internal usb on the cabinet ? - Is that easy?
- Do I need to give extra power to the single video card? or only when I have 2 video cards.
- Anything else I would require ?
========================
Most important-
There are too many options and numbers in the BIOS, I would 100% need help to configure those.
You have the list of hardware above, please let me know what to set. Also I am satisfied with normal settings, i dont need to burnout my computer so no OVERCLOCKING, just let me know the basic settings.
Today is THU 22nd June 2006, I will going for the BOX n Power stupply on SAT.
Thank you for all your help |
|
