Blue|Fusion
Rated XXX
|
 Posted: Fri, 26 May 2006 22:13:34 Post Subject: RAM errors w/ memtest86+ |
 |
|
Hey all! Today, while I was away at the movies, I decided to run memtest86+ on my desktop after changing some of the RAM timings to ensure everything's running smoothly. After almost 5 hours and 55 minutes of running, I had 28 errors...
All of them were from Test 5 on Pass 9 (of alot of passes). The errors went in somewhat sequential down the memory addresses, and the bit error on all of them was "00ff0000."
Than RAM is rated for DDR2-800 (400MHz) at 4-4-4-12 timings @ 2.1 volts. I just tweaked the timings a bit to 4-3-3-8. The voltage is set to AUTO in the BIOS and lm_sensors shows it at running at about 1.85V.
Are these errors indicating a problem or is it just that there was a sporradic error on one of the passes? |
|
