Asylum
Rated XXX
|
 Posted: Thu, 10 Nov 2005 23:27:29 Post Subject: |
 |
|
If you don't have a voltage meter or multimeter of some sort you can test your supply as follows..
1. remove supply from case DISCONNECT ALL LEADS FROM COMPUTER.
2. when supply is unplugged take a piece of wire or paper clip and jumper any black wire on the 24 pin connector to the green wire on the 24 pin connector. The green wire is the on switch.
3. plug it in and turn it on. If the fans in the power supply come on then the supply at least works. If no fans come on then its broke and you may be making the trip to Sydney. 
BTW an SLI system needs a high quality power source, I personally wouldn't trust one that came with a case. |
|
