sinister
Rated PG
|
 Posted: Tue, 10 May 2005 04:08:44 Post Subject: |
 |
|
| dadx2mj wrote: | The temps could be different for a few reasons. The biggest would be when I reviewed the system it was done on an AMD 2500+ your P4 may just be a hotter running chip. I also mounted the radiator outside of the case instead of on the inside. Things you should check are....
1) Make sure the system is full of the coolant and there are no air bubbles in the system
2) No kinks in any of the tubing (I have noticed the tubes coming out of the pump kink very easily)
3)Radiator fan blowing in proper direction
4) Make sure the water block is mounted properly |
ok... so there're no kinks and the radiator fan is blowing in the proper direction.
how can i be sure that the water block is mounted properly?
and, i didnt fill the pump full. should i do that? or is it enough that the water level is above the "LOW" line? (cuz that's the way it's now)
in addition. i placed two thermaltake 80mm fans in the front-blowing into the case and one fan on the side blowing into the case.
thanks for help. |
|
