PrimoChill ICE UV Blue Water Cooling Fluid

**Doctor Feelgood**

PrimoChill ICE performs as advertised, with a noticeably lower temperature in our test system. Given the slick oily feel, and the fact that PrimoChill ICE lived up to the claims regarding lower temperatures, I am inclined to believe that it will also live up to the claims of longer pump life and reduced internal build up in any water cooling system. - The Review

terrri_nobody · Rated PG Joined: 17 Nov 2005 Posts: 3

This product was also reviewed at the below site who found it to conduct electricity... Would you please consider a similar test to determine if this product really is or isn't conductive?

http://www.thinkcomputers.org/v2/index.php?x=reviews&id=281

Thank you

**Doctor Feelgood** · Posted: Fri, 18 Nov 2005 18:35:17 Post Subject:

Hi terrri_nobody, welcome!

Hmmm... that review either has a typo, or it is confusing to me. It looks like it should be non-conductive by his results, and I think he means to say "inconclusive" where he says "inclusive".

Maybe dadx2mj will have a minute to throw a multimeter on our sample... Grin

dadx2mj · Posted: Fri, 18 Nov 2005 19:08:07 Post Subject:

OK I took a small plastic cup which was non conductive and filled it with the PrimoChill ICE and then dropped the leads form my Fluke 77 meter in it. Making sure they were not touching each other or the sides of the plastic contain. I wanted to get pictures but my camera batteries died. Anyway with the PrimoChill ICE in the cup I got an ohm reading of 2.689. I then did the same test with some distilled water and got a reading of .689. From this simple test the PrimoChill ICE does seem to be somewhat conductive but not as conductive as distilled water.

**Doctor Feelgood** · Posted: Fri, 18 Nov 2005 19:55:54 Post Subject:

That is interesting, thanks for checking it out dadx2mj!!

The manufacturer's website is a waste of time for data, but Voyeurmods (and other vendors) need to rethink the published claim that:

"Testing has revealed that PC ICE is capable of staying within 2C* of standard water, while maintaining its non-conductive nature as well as lubricating properties."

Less conductive doesn't equate to non-conductive!!

Thanks!

Nookie420 · Posted: Mon, 21 Nov 2005 01:55:05 Post Subject:

send some of that my way if yo have extra, i'd like to try it out.

terrri_nobody · Rated PG Joined: 17 Nov 2005 Posts: 3

So with a reading of 2.69 (rounding) I would expect that while it might not conduct well, it could still cause some damage based on what got hit with a spill.
Low voltage non-sensitive items might survive but others I would think would not fair nearly as well.

Too Bad ... maybe they can fix the issue (unlikely)

Has anyone tried this same test with Fuid XP or the MCT family of products?
Be interesting to see if Any of the products are really non-conductive..

I have a partial bottle of Fuid XP I'll test ( once I find my meter)