PC Toys SimpleMax 101 mATX Case

Spire · Posted: Wed, 04 Feb 2004 20:41:11 Post Subject:

Considering that if you cut a full size window in the side panel, all you would see is half the case covered by the disk carrier, I would cut a smaller window just in the back half. would look very much better. This would also fox the concern that a window would not fit over the drive carrier.

BTW - welcome to BigBruin.com and make sure you get us some pics of your modded case when you get it done!!!

xvilemx · Posted: Wed, 04 Feb 2004 23:47:47 Post Subject:

last question, and, i will post up my mod completed, first micropc mod btw, ok, what are the measurements of the psu, thanks fer yer help.

Spire · Posted: Wed, 04 Feb 2004 23:54:54 Post Subject:

PSU is 4 7/8" across, 3 7/8" deep, and 2 1/2" tall.

xvilemx · Posted: Thu, 05 Feb 2004 01:54:48 Post Subject:

ok, i thought of one more ^^

can i get a pic of it with the side panel off ,and the hdd case closed? thanks

Spire · Posted: Thu, 05 Feb 2004 02:12:14 Post Subject:

Page 2 of the review, 3rd picture, just click on it and it will get bigger. Couldn't possibly get more than that for you!!! I think it's exactly what you are looking for.

Anything else I can help with let me know. The only price you must pay is posting the mods in the Mods and Ends section!!!!

Have Fun Cowboy

xvilemx · Posted: Thu, 05 Feb 2004 14:29:41 Post Subject:

any suggestions on how high the window should be, was thinkin of cuttin a window in my extra cd-rom, thinkin it should show that, like a small window, in the exposed part, is there at least a 1/8" of room between where the cd-rom comes out, would be awesome to see the cd spinnin in that mini case...let me know, thanks.

Spire · Posted: Thu, 05 Feb 2004 20:27:11 Post Subject:

I'm not sure what dimension you are talking about. Help me out here.

xvilemx · Posted: Thu, 05 Feb 2004 21:24:21 Post Subject:

between the cd drive, as it extends out, and the side panel.

Spire · Posted: Thu, 05 Feb 2004 22:57:01 Post Subject:

Yea I think there should be room.

xvilemx · Posted: Tue, 10 Feb 2004 01:43:34 Post Subject:

got any other ideas as to what i should do, im gonna get it powder coated, the chassis, then im gonna color match and shoot the front with an airbrush, prolly do a top mount blowhole too. not real sure as to what else.