INTERCOMPCSMHIGHCAPACITYM-Intercomp CSM High Capacity Manual Test StandIntercomp's line of test stands will meet your most exacting compression and tensile force measurement needs. This portable or floor mounted, high capacity, test stand features a digital, AC power, NTEP approved indicator and load cell. With an accuracy of &plusmn,0.1%, full capacity range of up to 100,000lbs (50,000kg), 8 (203mm) Travel, and sturdy steel construction, this test stand is the perfect addition to any test application.Available with NIST Calibrated Load Cells.Accuracy of &plusmn,0.1%Up to 100,000 lb (50,000 kg) CapacityNTEP Approved Load CellAC or Battery OperationHigh Speed Hand Pump uses Standard Hydraulic FluidRated:0/100 Reviews
100-MSI-9300 Porta-Weigh Plus CellScale RF Digital Crane Scale - 100,000 lb/ 50,000 kgThe MSI-9300 Porta-Weigh Plus RF Digital Crane Scale is designed to provide a rugged weight indicator and wireless data system for overhead weighing applications. The MSI-9300 merges CellScale technology with MSI@s superior Crane Scale architecture providing both local and remote display capabilities. Combined with CellScale accessory products, the MSI-9300 offers advanced data-gathering networking suitable for process control, safety monitoring and weight related data collection.The MSI-9300 circuitry is shock mounted and water proof making a robust overhead weighing system for use indoors and outdoors. The large 1.2 in (30mm) ultra bright LED digits are readable at distances up to 50 ft (15m). Display brightness can be set to automatically adjust to ambient lighting conditions for optimum viewing and battery conservation. Single or multiple crane scales can be controlled and monitored from single or multiple locations. Wireless, real-time, data transmission of weight and product information can be networked and communicated to CellScale family indicators and modems at distances up to 1000 ft (300m) outdoors. Operating range increases if optional long range antennas are used on other networked components. Both fixed and handheld indicators are available as well as modems for wireless connection to computers and scoreboards.The MSI-9300 Porta-Weigh Plus is available in a standard range of capacities up to 50 tons. Larger and special designs are available for any capacity. A host of standard scale features and options are available. For applications involving fixed hooks and/or power assisted rotation, see the MSI-9300HT product specification sheet. See also, product specification sheets for MSI-9000, MSI-9850, MSI-9750A and MSI-9020 for complete capabilities and wireless networked weighing system solutions.LiteratureRated:0/100 Reviews
GeneracQT06024A-Generac Guardian 60 kW standby Generator LP-SteelThe best liquid cooled engine packs more power into a smaller footprint - ideal when space is a premium.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self-test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel comsumption and fewer emissions.Sturdy, galvanneal steel enclosure with RhinoCoat™ finish for superior weather protection.Clean burning, continuous fuel choice of natural gas to LP.Neutral styling, color and small footprint fits unobtrusively into landscaping.Rated:0/100 Reviews
100-MSI-4260 Port-A-Weigh Crane Scale - 100,000lb/50,000kgWhen introduced in 1980, the MSI-4260 Port-A-Weigh promptly established the original industry standard for an accurate, reliable and safe solution for overhead crane weighing and material handling. After decades of production, added technology advancements and thousands of worldwide installations, Port-A-Weigh continues to set the standard by which all other crane scales are measured.Simple and user friendly, the Port-A-Weigh crane scale family provides amazing versatility combined with an unrivaled standard feature set:FeaturesRugged, Marine Grade 356 Alloy Cast Aluminum Enclosure Sealed to NEMA 4/IP 665 Digit, 1.2in (30mm) LED Display, visible from over 60ft (18.3m)Sealed Front Panel Switches100+ Hour Battery Life (battery charger included)9 Standard Capacity Ranges AvailableNTEP Legal for Trade Approved, up to 70,000lb (35,000kg)Advanced 20 Bit A/D Converter and 16 Bit ProcessorHigh Resolution (2,500-5,000 divisions standard, up to 10,000 available)Full Digital Calibration@(plus or minus 0.1% accuracy)Auto-Off and Auto-Sleep ModesSafety Service Counter (periodic inspection and maintenance reminders)Programmable Features - Totalizing, Peak Hold, Set Points, Units, Filtering and Self-TestOptional Full-Function RF Remote ControllerOptional Factory Mutual Approved Version (intrinsically safe for use in hazardous locations)LiteratureManualRated:0/100 Reviews
GeneracQT04854C-Generac QT04825C Generator 48kW 1 or 3-PhaseCalifornia CompliantPowerful low-speed, liquid cooled engine is engineered to run at only 1800 rpm for a substantially quieter generator, consuming less fuel and giving both the engine and alternator a longer life.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self-test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel consumption and fewer emissions. Standard aluminum, all-weather enclosure provides the ultimate protection from the elements. Aluminum’s corrosion resistance prolongs the life of your generator and is recommended for salt-air, coastal locations.Clean burning, continuous fuel choice of LP or natural gas.Neutral styling, color and small footprint fits unobtrusively into landscaping.Rated:0/100 Reviews
100688RFX-Intercomp CS3000 Crane Scale - 100688-RFXThe Intercomp CS3000 crane scale offers high visibility with a 1 (25mm) LCD Display on the scale and 0.5 Backlit Display on the RFX&trade, Wireless Handheld Indicator.LiteratureCS3000 Standard Features&bull,2,000 lb (1,000 kg) to 100,000 lb (50,000 kg) Capacities&bull,NTEP Approved Models Available@&bull,Large, Easy-to-Read, LCD Display&bull,Standard D-Cell Batteries Last up to 3,000 Hours in Scales @ 40 Hours in Handheld RFX&trade, Wireless IndicatorFully featured, high capacity, industrial crane scale for heavy duty applications, featuring Intercomp's exclusive RFX&trade, Wireless Weighing Technology. This scale offers high visibility with a 1 (25mm) LCD Display on the scale and 0.5 Backlit Display on the RFX&trade, Wireless Handheld Indicator.Capacities range from 2,000lbs (1,000kg) to 100,000lb (45,000kg), NTEP Approved to 50,000lb (25,000kg). Handheld RFX&trade, Wireless Indicator with Batteries, Charger @ Case, Top Eyehook @ Crosby S-1 swivel hook standard.PerformanceAccuracy: +/- 0.1%ControlsGeneral: On/Off, Zero, Tare Set/Display, Tare Clear @ ZeroDisplay:@1 (20mm) LCD on Scale, .5 (12mm) on IndicatorIndicators: lb/kg @ NetEnvironmentalHumidity: 10 to 95% Non-CondensingTemperature: -4 to 140&deg,F (-20 to 60&deg,C)PhysicalOverload: 200% of CapacityElectricalBattery in Scales: Standard Alkaline or Rechargeable D-CellBattery Life in Scales: 3,000 HoursBattery in Indicator: Standard Alkaline or Rechargeable AABattery Life in Indicator: 40 HoursIntercomp also offers RS232 Output, Anti Magnetic Shielding and Direct Power for these scales. Contact us for detailsRated:0/100 Reviews
GeneracQT06024S-Generac Guardian 60 kW standby Generator NG-SteelThe best liquid cooled engine packs more power into a smaller footprint - ideal when space is a premium.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self-test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel comsumption and fewer emissions.Sturdy, galvanneal steel enclosure with RhinoCoat™ finish for superior weather protection.Clean burning, continuous fuel choice of natural gas to LP.Neutral styling, color and small footprint fits unobtrusively into landscaping.Delivery Requirements: Must have a fork lift or loading dock. No residential deliveries.Rated:0/100 Reviews
GeneracQT04854-Generac QT04854 Generator 48kW 1 or 3-PhasePowerful low-speed, liquid cooled engine is engineered to run at only 1800 rpm for a substantially quieter generator, consuming less fuel and giving both the engine and alternator a longer life.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self-test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel consumption and fewer emissions. Standard aluminum, all-weather enclosure provides the ultimate protection from the elements. Aluminum’s corrosion resistance prolongs the life of your generator and is recommended for salt-air, coastal locations.Clean burning, continuous fuel choice of LP or natural gas.Neutral styling, color and small footprint fits unobtrusively into landscaping.Rated:0/100 Reviews
GeneracQT04524C-Generac Guardian 45 kW Emergency Standby Power Generator -CA CompliantThe best liquid cooled engine packs more power into a smaller footprint - ideal when space is a premium.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel consumption, and fewer emissions.Sturdy, galvanneal steel enclosure with RhinoCoat™ finish for superior weather protection.Clean burning, continuous fuel choice of natural gas to LP.Neutral styling, color and small footprint fits unobtrusively into landscaping.CALIFORNIA MODELRated:0/100 Reviews
70-MSI-9300 Hi-Torque Porta-Weigh Plus Cell Scale RF Digital Crane Scale - 70,000 lb/ 35,000 kgThe@MSI-9300HT Porta-Weigh Plus, Hi-Torque RF Digital Crane Scale provides an ideal@solution for overhead weighing applications where powered rotation of the lifted material is required. The Hi-Torque load train of the MSI-9300HT features a new load cell design that withstands the induced torque associated with power assisted rotating loads. With options available for both top and bottom attachments, the MSI-9300HT can easily integrate with new or existing powered rotators to provide safe material handling and increased operational efficiency.Like the standard MSI-9300, the new Hi-Torque version merges CellScale technology with MSI's superior crane scale architecture to provide an advanced wireless data-gathering network suitable for process control, safety monitoring and weight related data collection. RF transmission of real time weight and product information can be networked and communicated to CellScale family indicators and modems.The MSI-9300HT is available in four standard capacities up to 35 tons. A host of standard features and options are available, including anti-heat shielding for high temperature applications, direct AC or DC power input, audible alarm and an RF remote controller.@LiteratureManualRated:0/100 Reviews
GeneracQT03624-Generac QT03624 Generator 36kW 1 or 3-PhasePowerful low-speed, liquid cooled engine is engineered to run at only 1800 rpm for a substantially quieter generator, consuming less fuel and giving both the engine and alternator a longer life.Generac's Nexus™ Controller is the most comprehensive available. The dual line, tri-lingual LCD display allows for easy monitoring and management of generator functions.Quiet-Test™ mode for a weekly self-test that runs quieter than other brands. Patented, programmable feature validates proper operation. Runs at lower RPM for reduced noise, less fuel consumption and fewer emissions. Standard aluminum, all-weather enclosure provides the ultimate protection from the elements. Aluminum’s corrosion resistance prolongs the life of your generator and is recommended for salt-air, coastal locations.Clean burning, continuous fuel choice of LP or natural gas.Neutral styling, color and small footprint fits unobtrusively into landscaping.Rated:0/100 Reviews
70-MSI-9300 Porta-Weigh Plus CellScale RF Digital Crane Scale - 70,000 lb/ 35,000 kgThe MSI-9300 Porta-Weigh Plus RF Digital Crane Scale is designed to provide a rugged weight indicator and wireless data system for overhead weighing applications. The MSI-9300 merges CellScale technology with MSI@s superior Crane Scale architecture providing both local and remote display capabilities. Combined with CellScale accessory products, the MSI-9300 offers advanced data-gathering networking suitable for process control, safety monitoring and weight related data collection.The MSI-9300 circuitry is shock mounted and water proof making a robust overhead weighing system for use indoors and outdoors. The large 1.2 in (30mm) ultra bright LED digits are readable at distances up to 50 ft (15m). Display brightness can be set to automatically adjust to ambient lighting conditions for optimum viewing and battery conservation. Single or multiple crane scales can be controlled and monitored from single or multiple locations. Wireless, real-time, data transmission of weight and product information can be networked and communicated to CellScale family indicators and modems at distances up to 1000 ft (300m) outdoors. Operating range increases if optional long range antennas are used on other networked components. Both fixed and handheld indicators are available as well as modems for wireless connection to computers and scoreboards.The MSI-9300 Porta-Weigh Plus is available in a standard range of capacities up to 50 tons. Larger and special designs are available for any capacity. A host of standard scale features and options are available. For applications involving fixed hooks and/or power assisted rotation, see the MSI-9300HT product specification sheet. See also, product specification sheets for MSI-9000, MSI-9850, MSI-9750A and MSI-9020 for complete capabilities and wireless networked weighing system solutions.LiteratureRated:0/100 Reviews
100687RFX-Intercomp CS3000 Crane Scale - 100687-RFXThe Intercomp CS3000 crane scale offers high visibility with a 1 (25mm) LCD Display on the scale and 0.5 Backlit Display on the RFX&trade, Wireless Handheld Indicator.LiteratureCS3000 Standard Features&bull,2,000 lb (1,000 kg) to 100,000 lb (50,000 kg) Capacities&bull,NTEP Approved Models Available@&bull,Large, Easy-to-Read, LCD Display&bull,Standard D-Cell Batteries Last up to 3,000 Hours in Scales @ 40 Hours in Handheld RFX&trade, Wireless IndicatorFully featured, high capacity, industrial crane scale for heavy duty applications, featuring Intercomp's exclusive RFX&trade, Wireless Weighing Technology. This scale offers high visibility with a 1 (25mm) LCD Display on the scale and 0.5 Backlit Display on the RFX&trade, Wireless Handheld Indicator.Capacities range from 2,000lbs (1,000kg) to 100,000lb (45,000kg), NTEP Approved to 50,000lb (25,000kg). Handheld RFX&trade, Wireless Indicator with Batteries, Charger @ Case, Top Eyehook @ Crosby S-1 swivel hook standard.PerformanceAccuracy: +/- 0.1%ControlsGeneral: On/Off, Zero, Tare Set/Display, Tare Clear @ ZeroDisplay:@1 (20mm) LCD on Scale, .5 (12mm) on IndicatorIndicators: lb/kg @ NetEnvironmentalHumidity: 10 to 95% Non-CondensingTemperature: -4 to 140&deg,F (-20 to 60&deg,C)PhysicalOverload: 200% of CapacityElectricalBattery in Scales: Standard Alkaline or Rechargeable D-CellBattery Life in Scales: 3,000 HoursBattery in Indicator: Standard Alkaline or Rechargeable AABattery Life in Indicator: 40 HoursIntercomp also offers RS232 Output, Anti Magnetic Shielding and Direct Power for these scales. Contact us for detailsRated:0/100 Reviews
EMX275SWDISTANCEMETER-Imada EMX Motorized Test Stand - EMX-275-S w/ distance meterThe EMX-275 Vertical Motorized Test Stand uses a precision stepper motor and ball screw drive that provide precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results.Precise Increment TestingEMX-275 features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head exactly .01 mm (may reduce at maximum capacity depending upon material hardness).Cycle ModeIn cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Separate screens control start and return speeds. /p@Force ControlForce controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the EMX-275 test stand to enable the following force controlled tests and Conditional Overload Prevention.Maintain Force Between High/Low SetpointsInitial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.Increase Force to High Setpoint and StopInitial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for creep or non-destructive testing. The cycle is repeated until the counter limit is reached.Ultra rigid, .25mm deflection at maximum loadWide speed range: .01 @ 23.5 in/min (.5 @ 600 mm/min)Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectableEasy-to-use program dial and menu screens control distance, mode, speed, time and cyclesUp to five test configurations saved in memoryProgrammable travel distanceProgrammable timer up to 99' 59.9, in 0.1 sec incrementsOne stand for both compression and tension testsForce Controlled operation with Imada Z force gaugesOptional digital distance meter availableConditional Overload PreventionStroke: 12.4 (315mm)Max clearance 9 (with extender 14)LiteratureRated:0/100 Reviews
IMADAEMXMOTORIZEDTESTSTAN-Imada EMX Motorized Test StandThe EMX-275 Vertical Motorized Test Stand uses a precision stepper motor and ball screw drive that provide precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results.Precise Increment TestingEMX-275 features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head exactly .01 mm (may reduce at maximum capacity depending upon material hardness).Cycle ModeIn cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Separate screens control start and return speeds. /p@Force ControlForce controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the EMX-275 test stand to enable the following force controlled tests and Conditional Overload Prevention.Maintain Force Between High/Low SetpointsInitial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.Increase Force to High Setpoint and StopInitial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for creep or non-destructive testing. The cycle is repeated until the counter limit is reached.Ultra rigid, .25mm deflection at maximum loadWide speed range: .01 @ 23.5 in/min (.5 @ 600 mm/min)Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectableEasy-to-use program dial and menu screens control distance, mode, speed, time and cyclesUp to five test configurations saved in memoryProgrammable travel distanceProgrammable timer up to 99' 59.9, in 0.1 sec incrementsOne stand for both compression and tension testsForce Controlled operation with Imada Z force gaugesOptional digital distance meter availableConditional Overload PreventionStroke: 12.4 (315mm)Max clearance 9 (with extender 14)LiteratureRated:0/100 Reviews
EMX275-Imada EMX Motorized Test Stand - EMX-275The EMX-275 Vertical Motorized Test Stand uses a precision stepper motor and ball screw drive that provide precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results.Precise Increment TestingEMX-275 features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head exactly .01 mm (may reduce at maximum capacity depending upon material hardness).Cycle ModeIn cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Separate screens control start and return speeds. /p@Force ControlForce controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the EMX-275 test stand to enable the following force controlled tests and Conditional Overload Prevention.Maintain Force Between High/Low SetpointsInitial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.Increase Force to High Setpoint and StopInitial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for creep or non-destructive testing. The cycle is repeated until the counter limit is reached.Ultra rigid, .25mm deflection at maximum loadWide speed range: .01 @ 23.5 in/min (.5 @ 600 mm/min)Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectableEasy-to-use program dial and menu screens control distance, mode, speed, time and cyclesUp to five test configurations saved in memoryProgrammable travel distanceProgrammable timer up to 99' 59.9, in 0.1 sec incrementsOne stand for both compression and tension testsForce Controlled operation with Imada Z force gaugesOptional digital distance meter availableConditional Overload PreventionStroke: 12.4 (315mm)Max clearance 9 (with extender 14)LiteratureRated:0/100 Reviews
