Celestron93920-Computer Interface Serial Cable RS-232 to Standard Serial PortThe RS-232 serial cable connects into the Nexstar hand control or on some models, into the port on the drive base, and the other end connects into a computer.One end of the cable is a phone type jack, (RS-232) and the other end is a standard serial computer input.With CD ROM software this cable will enable your computer laptop or desktop to interface and control the telescope by pointing and clicking on sky maps shown on the computer monitor. With certain telescopes the cable allows downloading additional data from the Celestron website into the database of the Nexstar computer hand control.Rated:8/101 Review
Orion05375-Orion Quick Release Shoe for Paragon HD-F2/XHD TripodsOwning an extra quick release shoe for your Paragon HD-F2 or Paragon-Plus XHD tripod will allow you to leave a shoe attached to each of your cameras/telescopes for quick attachment to the tripod. Photographers often leave a dovetail shoe attached to each one of their cameras, so that they can very quickly switch them around and still use the same tripod. An extra quick release shoe can also be used as a replacement if you have lost your original mounting shoes.Rated:0/100 Reviews
Orion Telescopes07385-13" Orion Dovetail Mounting PlateDovetail mounting plates provide a platform for coupling telescope optical tubes to SkyView Pro and Atlas equatorial mounts. Tube rings (sold separately) bolt on to the dovetail plate, which then fits into the dovetail slot on the equatorial head. Dovetail plates are made of extruded, anodized aluminum. Length: 13 Note: 13 dovetail plate comes standard with the Atlas mount.Rated:0/100 Reviews
Orion07383-8" Orion Dovetail Mounting PlateDovetail mounting plates provide a platform for coupling telescope optical tubes to SkyView Pro, Atlas, Sirius, AstroView and VersaGo equatorial mounts. Tube rings (sold separately) bolt on to the dovetail plate, which then fits into the dovetail slot on the equatorial head. Dovetail plates are made of extruded, anodized aluminum. Length 8 . Note: One 8 dovetail plate comes standard with the SkyView Pro and Sirius mounts.Rated:0/100 Reviews
Orion07882-Orion Holster for IntelliScope Object ControllerMade of aluminum, the holster holds the IntelliScope Computerized Object Locator firmly at the top of the base side board for easy access. The Object Locator can be quickly slid into and out the holster during use, or it can be commanded directly from its mounted position in the holster. A template is included for drilling two pilot holes to mount the holster, and two mounting screws are supplied. The holster is slotted to allow quick removal for transport, if desired.Rated:0/100 Reviews
Orion Telescopes07816-Orion Cooling Accelerator Fan for Large Reflector TelescopesSpeed up the cooling of your big reflector's optics to ambient temperature with this small, quiet fan. It attaches to pretapped and threaded holes in the mirror cells of Orion SkyQuest XT8 and XT10 Dobsonians, Orion Atlas 8 and Atlas 10 reflectors, and the Orion SkyView Pro 8 reflector. Mounting screws are supplied. Runs on 12 volts DC power supplied by the included battery pack, which uses eight D-cell batteries (not included). You can run the fan prior to observing, then turn it off, or you can even keep it running while observing; there is no noticeable vibration. Battery life is about 13-14 hours of continuous operation. Also compatible with 12-volt field battery with our #5613 DC power cable.Rated:0/100 Reviews
Orion Telescopes07381-Orion 105mm ID Pair of Guide Scope RingsPair of cast-metal rings of 105mm inner diameter that attach to a mounting plate for Orion guidescopes of up to 80mm aperture. Each ring has three black nylon alignment screws, which will not scratch guidescope finish. Rings attach to mounting plate with two 1/4-20 hex-head cap screws (included). A small wrench is also included.Rated:0/100 Reviews
Orion Telescopes07369-76mm ID Orion Telescope Tube RingsOur cast-aluminum tube rings feature quick-release, hinged clamp knobs and felt lining. Designed for use with the Orion Oberserver 70, they fit some other brands of mounts as well. One of the two rings in each set has a 1/4-20 piggyback camera adapter on it, the other has a threaded 1/4-20 hole. The piggyback camera adapter can be removed for mounting an adapter plate for a guide scope on top of the tube rings. Set of two rings includes mounting bolts and washers. Inside diameter (ID) is 76mm/3. Choose the size that matches the outside diameter of your telescope tube. One-year limited warranty.Rated:0/100 Reviews
Orion Telescopes05052-Orion Dovetail L-Bracket for VersaGo Telescope MountAluminum L-bracket provides a horizontal platform for coupling small telescopes or binoculars to the Orion VersaGo altazimuth mount's vertical arm. Slotted plate has captive 1/4-20 threaded post and finger knob for attachment of instrument. Dovetail base locks securely in the VersaGo's dovetail saddle. Holds telescopes up to 6 in aperture and binoculars up to 100mm. A bolt stop in the dovetail base prevents the bracket from accidentally slipping out of the saddle.Rated:0/100 Reviews
Orion Telescopes07398-2.1lb Counterweight for EQ-1 & Min-EQ MountsThe 2.1lb counterweight for the Orion EQ-1 and Min-EQ equatorial mounts lets you take full advantage of the equatorial mount's tracking abilities, even when you have a small amount of equipment attached. Ideal for use with smaller equipment payloads such as a DSLR camera or small telescope, the narrow 2.1lb counterweight will not make contact with the EQ-1M motor drive housing during extensive motorized tracking of celestial objects. If you are, for example, performing wide-field astrophotography using a DSLR camera and a wide camera lens, this narrow counterweight provides enough weight to balance the DLSR properly on the equatorial mount, and it won't interfere with the EQ-1M motor drive housing while tracking. Many standard 5lb and heavier counterweights are too heavy to achieve proper balance with lighter equipment payloads on an equatorial mount. In most cases you must position the heavy counterweight all the way up the counterweight shaft to optimize balance. In this position, the standard wide counterweight can make contact with the EQ-1M motor drive, making it impossible to track an object for extended periods of time. This narrow 2.1lb counterweight is perfect for achieving proper balance with lighter equipment, and its narrow 46mm (1.8) diameter will not make contact with the EQ-1M motor drive, no matter what the orientation is of the Right Ascension axis. Now you can track celestial objects all night long without having to worry!Rated:0/100 Reviews
Orion Telescopes07951-Wide Dovetail Saddle for Atlas EQ-G Telescope Mount (2009)For years, telescope manufacturers have typically utilized two types of dovetail mounting systems. A wide version (such as the one used by Losmandy) and a narrow version (which fits telescopes made by Orion, Vixen, etc.). Unfortunately, this limited which Optical Tube Assembly could be used with your mount. Specifically if you had a telescope or tube ring system with a wide dovetail bar, and wanted to use our Orion Atlas EQ-G Mount which requires the narrow bar. With the new Wide Dovetail Saddle, your Atlas mount can be joined in harmony with its non-Orion OTA companion. Simply remove the narrow saddle and replace it with wide saddle. There are two saddles available with slightly different base components. Atlas mounts manufactured in 2009 require the #7951 saddle, whereas Atlas mounts made prior to 2009 accept only the #7950 saddle. If you're not sure which vinatge of moutn you have, simply measure the height of the declination collar with a metric ruler. For Atlas mounts manufactured in 2009, the collar is 57mm tall and will require saddle #7951. For those made before 2009, the collar is 53mm and will require saddle #7950. Both Wide Dovetail Saddles are precision machined from die-cast aluminum for long-lasting durability. The spring-loaded, split-clamp design allows the saddle to be opened wide for easy drop-in attachment of the dovetail bar. Two large knobs provide excellent grip for tightening the saddle clamp, even with gloves on.Rated:0/100 Reviews
Orion Telescopes07384-7.5lb Counterweight for SkyView Pro & AstroViewFor heavier telescopes and astrophotographic setups, an extra counterweight or two may be needed. These counterweights have an attractive finish and a large lock knob for easy grip, even with gloves on. The 7.5-lb weight fits the Orion AstroView and SkyView Pro mounts.Rated:0/100 Reviews
Orion Telescopes07373-140mm ID Orion Telescope Tube RingsThese cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4-20 piggyback camera adapter on it, the other has a threaded 1/4-20 hole. Sold in sets of two rings. Mounting bolts and washers are included. Inside diameter (i.d.) is 140mm/5.5. One-year limited warranty.Rated:0/100 Reviews
Orion Telescopes07372-116mm ID Orion Telescope Tube RingsThese cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4-20 piggyback camera adapter on it, the other has a threaded 1/4-20 hole. Sold in sets of two rings. Mounting bolts and washers are included. Inside diameter (i.d.) is 116mm/4.6. One-year limited warranty.Rated:0/100 Reviews
Orion Telescopes07371-100mm ID Orion Telescope Tube RingsThese cast-aluminum rings feature quick-release, hinged clamp knobs and felt lining. They are designed for use with the Orion EQ-1, EQ-2, EQ-3, or AZ-3 mounts, and may fit some other mounts as well. One of the two rings in each set has a 1/4-20 piggyback camera adapter on it, the other has a threaded 1/4-20 hole. Sold in sets of two rings. Mounting bolts and washers are included. Inside diameter (i.d.) is 100mm/3.9. One-year limited warranty.Rated:0/100 Reviews
Orion Telescopes07374-144mm ID Orion Telescope Tube RingsHinged, cast-aluminum rings with felt lining. Designed for use with Orion SkyView Pro and Atlas equatorial mounts; and may fit some other mounts as well. One ring in each set has a 1/4-20 piggyback camera adapter, the other has a threaded 1/4-20 hole. Sold in sets of two rings. Mounting bolts and washers are included. Inside diameter (i.d.) is 144mm. One-year limited warranty.Rated:0/100 Reviews
