| Cooler Master Centurion 532 Case
|
The Basics (continued):
Also inside the case was a full range of motherboard to case connectors. Included in the bundle were the standard power and hard drive activity LEDs,a s well as wiring for power and reset switches. A few thicker shielded cables were also included for a pair of USB 2.0 connectors and a Firewire port.
One last cable had all kinds of busy things going on. This would be the audio cable. In one cable Cooler Master has given the user the ability to interface the audio in three different ways. Moving down the cable, the first connector is for Intel HD audio, the second connector is a standard AC '97, and finally if your board fits none of these standards, you have single pin connectors to hook up however you want.
 
A few small clips on each side and the front of the case pops right off. The entire mesh area of the Centurion 532 is backed with a fabric filter. The lower part of the front hides another fan mount location like the rear, your choice of 80mm, 92mm, or 120mm fans. The area of the front panel that hides the fan has a removable filter assembly that is also removed by just a few small clips. The front panel will have to be removed before accessing the filter.
 
Even the removable 5 ¼" bay covers are mesh and include a filter behind each one. Small tabs that are bent inward hold the filter in.
 
|
|
|
|
